Toiling

Half toile


First I did a half toile for the right and side which features a frog mouth pocket integrated into a panelled front. Sewing the frog mouth pocket into the panel was the hardest part of the toile as I had to negotiate it around the curve of the pocket. I had to rely on my notches which were NOT accurate. So I had to go back to my pattern and alter it, which was harder than I anticipated.


My collar worked perfectly as did the rest of the pattern.




Full toile


The full toile was a little bit more difficult.


The notches again did not match up on my pocket so I have to re think my pattern. Notches did not match up in several places so I need to  look at the rest of the pattern and double check.


I had difficulty with my full collar. Though it fit my 1/2 toile it did not my full toil. So I checked my pattern and my collar was 2cm too big so I amended it and carried on. The problem was that I didn't do a facing on my half toile I just added 5cm on to the raw edge of my front. My notches again need to be looked at due to the fact of me changing the length. 


The sleeves I could not fit in so I ended up with a tuck at the top of each sleeve, this is because calico is not the easiest fabric to manipulate and due to the time scale before the fitting I left it as that however in my final jacket I will not cut any corners.

Pattterns

Over all I have had little problems with the patterns. I found modelling the patterns on the stand minimised difficulties as you can follow your design in a 3D form like you have drawn it.


I started with the right hand side of my jacket due to the fact that it is asymmetric. I could not use the same pattern for both sides. Which I am glad of as I have learnt more techniques from doing this. 


I found doing the pattern for the left hand front more complicated as it features a panelled concealed front which I have never done before. I confused myself as I was not putting the centre front in the correct place making it much more difficult as the centre front is vital for the concealed front. But once I got this under control everything was fine.

10/05

Doing the pattern for my final design is interesting. My design features some design details I have not used before such as a frog mouth collar,back vent and conceal front fastening. So pattern cutting and toiling is going to be a learning curve.

02/05

Its the end of the Easter holiday and I have not done as much as I need to.


The design sheets are taking longer than anticipated. I think this is because when I am colouring my design I am shading them with pen when I should just do it on  Photoshop as it creates a cleaner look.

The start of design pages

I am currently doing designing, spec drawings and design sheets. Whilst annotating one of my sheets I found this piece of information.

Modern bespoke styles and high end off-the-rack suits equipped with surgeon's cuffs have the last two buttons stitched off-centre, so that the sleeve hangs more cleanly should the buttons ever be undone.

http://www.cindywuphotography.co

Types of lapel

A step collar

The notched lapel (American English), step lapel or step collar (British English) is sewn to the collar at an angle, creating a step effect. This is the standard on single breasted suits, and is used on nearly all suit jackets, blazers, and sports jackets. The size of the notch can vary, and a small notch is called fishmouth.

A pointed lapel

The peaked lapel (American English), double breasted style lapel or pointed lapel (British English), is the most formal, featuring on double-breasted jackets,  and is now always worn with all formal coats such as a tailcoat or morning coat, and also commonly with a dinner jacket (both single and double breasted). The ability to properly cut peak lapels on a single-breasted suit is one of the most challenging tailoring tasks, even for very experienced tailors. 

A shawl lapel

The shawl lapel, roll collar, or shawl collar is a continuous curve. Originally seen on the Victorian smoking jacket, it is now most common on the dinner jacket (tuxedo). 

There are also other variations, such as the Nehru jacket, with no lapel.

http://wapedia.mobi/en/Lapel

Design

From looking at my sketch book I want to show simplicity within a tailored piece, I am going to do this by having small details or one point of focus as in Amish country the only detailing they have is that of the practical nature.


How can I show this?


-Panelling
-Pockets
-Darts 
-Stitching